Specifies the path to the directory for all automatic save files for the current session.
Displays the file name and directory path of the most recently saved drawing.
Stores the number of boxes in the screen menu area of the drawing area.
Controls whether alternate scale representations are temporarily displayed in a dimmed state when an annotative object is selected
Controls the transparency of the selection area during window and crossing selection.
Controls which properties must match for an object of the same type to be selected with SELECTSIMILAR.
Controls which properties are selected for the SETBYLAYER command.
Sets the ratio of diffuse reflective light to ambient light.
Controls the location of an invisible ground plane used to display shadows.
Controls whether Default, Edit, and Command mode shortcut menus are available in the drawing area.
Displays icons in the Layer Properties Manager to indicate whether layers are in use.
Indicates whether the palettes, including the ribbon and the Command window, are displayed or hidden.
Sets a default shape name that must conform to symbol- naming conventions.
Controls whether a warning is presented when a file with an attached digital signature is opened.
Determines whether the SKETCH command generates lines, polylines, or splines.
Determines how closely the spline fits to the freehand sketch.
Determines if the sky illumination is computed at render time.
Sets whether mesh objects that you convert to 3D solids or surfaces are smoothed or faceted, and whether their faces are merged.
Sets the maximum level of smoothness at which the underlying mesh facet grid is displayed on 3D mesh objects.
Sets the maximum number of faces permitted for mesh objects.
Sets the snap and grid rotation angle for the current viewport relative to the current UCS.
Sets the snap and grid origin point for the current viewport relative to the current UCS.
Turns 3D solid validation on and off for the current session.
Controls the default history property setting for solid objects.
Controls object sorting in support of draw order for several operations.
Stores the last-used degree setting for splines and sets the default degree setting for the SPLINE command when specifying control vertices.
Sets the number of line segments to be generated for each spline-fit polyline generated by the Spline option of the PEDIT command.
Sets the type of curve generated by the Spline option of the PEDIT command.
Stores the last-used knot parameterization for splines and sets the default knot setting for the SPLINE command when specifying fit points.
Stores the last-used spline method and sets the default method for the SPLINE command.
Displays the sheet set path and file name if a search for a sheet set is successful.
Controls whether the sheet set associated with a drawing is located and opened when the drawing is opened.
Controls the display behavior of the Sheet Set Manager when a drawing associated with a sheet is opened.
Controls the time interval between automatic refreshes of the status data in a sheet set.
Indicates whether the Sheet Set Manager window is open or closed.
Specifies whether a user is notified of standards violations in the current drawing when a nonstandard object is created or modified.
Controls whether the Create New Drawing dialog box is displayed when a new drawing is started with NEW or QNEW.
Controls the display of the application and drawing status bars
Specifies the size of each step when in walk or fly mode, in drawing units.
Specifies the number of steps taken per second when you are in walk or fly mode.
Filters whether faces, edges, vertices or solid history subobjects are highlighted when you roll over them.
Indicates whether the Sun Properties window is open or closed.
Turns on and off the lighting effects of the sun in the current viewport.
Controls whether surfaces maintain a relationship with the objects from which they were created.
Sets the dragging preview behavior of associative surfaces to increase performance.
Controls whether surfaces are automatically trimmed when you project geometry onto them.
Controls whether surfaces are created as procedural surfaces or NURBS surfaces.
Sets the number of tabulations to be generated for the RULESURF and TABSURF commands.
Sets the mesh density in the N direction for the REVSURF and EDGESURF commands.
Controls the type of surface-fitting to be performed by the Smooth option of the PEDIT command.
Sets the surface density for PEDIT Smooth in the M direction and the U isolines density on surface objects.
Sets the surface density for PEDIT Smooth in the N direction and the V isolines density on surface objects.
Indicates the system code page, which is determined by the operating system.
